This sports camera can be mounted on the chest of a helmet or on other chosen locations by broad bands, it records audio video files of your extreme sports experience. Powering it on is easy - with the touch of a button and the same button will stop it. At the touch of a button the beginning of the record, and when you want to stop - press button again. The camera works with 3. AAA batteries.
Sensor - 1.3 MP
Resolution - 640x480 / 30 fps
microSD card slot - up to 8 GB
Video Format - AVI
Camera, shooting on the move
1.Records video in the embedded memory played on PC
2. Records video on an additional, external TF card memory, play on computer
3. Can be used as PC camera
1.Before you start using this camera, you can put batteries. Insert 3 AAA batteries in the area, observing the poles.
2.Put the Memory Card
3.Move the key incl. / Excl. Position ON, to turn the camera off the same switch is moved to OFF position.
4.When already included the camera, press the shutter, you can hear the sound "Di", while the LED light should start flashing. The camera starts recording equally. To stop recording, press the same key.
5. Playback via a computer from a locked position of the camera, connect the USB cable to your computer, open the folder My computer, where among other devices, you will see two partitions for storing files, such as one share of internal memory, while the other - the TF map. Double click the folder named "\ DCIM \ 100Media", to view the files.
6.PC camera: When the camera is off, connect the USB cable to the computer and double-click the icon that appears in your Windows explorer. Now I have a PC camera for video chat.
Note: Under a PC camera device only works when I install the drivers from applications to disk sets.
Installation of drivers:
To operate your camera as a PC camera, insert the disk in the set to your reader and install the software in it. Open from Explorer and run the disc will be called "AT21_A_2". This will automatically start the installation process. On your desktop should appear pop-up window that will ask you which drivers you want to upload. In this case, press the Install Driver and follow the instructions until the installation adventures.
Once you have completed the installation of drivers, connect the camera to the computer via USB cable. The device should be recognized by the computer and your operating system after about ten seconds.
Click on the button Finish, and then disconnect the camera from the computer. Restart the computer and then reconnect the camera to the computer to use as web camera.